CRL P1HV1104DC Wood’s Powr-Grip Single Channel DC Vacuum Lifting Frame For Rough Material

Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These Vacuum Lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.
Standard Vacuum Pad Spread:
Cat. Nos. P11104DC, P11104AC, P11104A1RS – 51″ x 12″ (1.30 m x 305 mm)
Cat. Nos. P11004DC, P11004AC, P11004A1RS – 49″ x 10″ (1.25 m x 254 mm)
Cat. Nos. P1HV1104DC, P1HV1104AC, P1HV1104A1RS – 50″ x 11″ (1.27 m x 280 mm)
Number/Size of Vacuum Pads:
Cat. Nos. P11104DC, P11104AC, P11104A1RS – 4/11″ (280 mm) Diameter Lipped Vacuum Pads
Cat. Nos. P11004DC, P11004AC, P11004A1RS – 4/10″ (254 mm) Diameter Concave Vacuum Pads
Cat. Nos. P1HV1104DC, P1HV1104AC, P1HV1104A1RS – 4/10″ (254 mm) Diameter Lipped Vacuum Pads
Lifting Capacity*:
Cat. Nos. P11104DC, P11104AC, P11104A1RS – 700 Lbs. (317 kg)
Cat. Nos. P11004DC, P11004AC, P11004A1RS – 600 Lbs. (272 kg) (Capacity is reduced on curved surfaces. Call for capacity on curved surfaces)
Cat. Nos. P1HV1104DC, P1HV1104AC, P1HV1104A1RS – 600 Lbs. (272 kg) (*On smooth, non-porous surfaces. Call for recommendations on other surfaces)
Average Weight of Vacuum Lifter: 70 Lbs. (32 kg)
Standard Operating Power:
Cat. Nos. P11104DC, P11004DC, P1HV1104DC: 12V DC, 10 AMP (for each Pad Channel)
Cat. Nos. P11104AC, P11004AC, P1HV1104AC: 120V AC, 60 Hz, 10 AMP
Cat. Nos. P11104A1RS, P11004A1RS, P1HV1104A1RS: Three SCFM (85 Liters/Min) Nominal Air Flow
Load Movement:
Manual rotation, 180 degrees edgewise, with locking in three positions. Manual tilt, 90 degrees between upright and flat, with automatic latching in upright position.
Standard Features:
On-board Battery and Charger
Battery Energy Gauge
Low Vacuum Warning Light
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank (On Each Pad Channel)
Available Options:

Dual Vacuum System Cat. No. E010DVS

Removable Control Pendant Cat. No. E09RP

Remote Control System Cat. No. E08RC

Closed Cell Foam Vacuum Pad Rings Cat. No. FRHV11 (Available on P1HV1104 Series Lifters only)

ABS Shipping Case Cat. No. 53005
COMPONENTS:
Pad Channels Each channel features an independent, on-board vacuum generating system, including vacuum pump, vacuum controls and all standard features listed above.
Cat. No. PC1104: 4/11″ (280 mm) Diameter Lipped Vacuum Pads
Cat. No. PC1004: 4/10″ (254 mm) Diameter Concave Vacuum Pads
Cat. No. PCHV1104: 4/10″ (254 mm) Diameter Lipped Vacuum Pads
Lift Frames:
Cat. No. PCFT1A1: 4/11″ (280 mm) Diameter Lipped Vacuum Pads
Cat. No. PCFT2SA45: 4/10″ (254 mm) Diameter Concave Vacuum Pads
Cat. No. PCFT2SA7: 4/10″ (254 mm) diameter lipped vacuum pads
Interchangeable Arms:
Vacuum pad spread can be changed if optional arms are purchased.
Cat. No. FA245: Optional Arms Convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame
Cat. No. FA27: Optional Arms Convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.